Dual Zone BedJet 3 Climate Comfort System for Couples

The single zone system will heat or cool any size bed and consists of a single BedJet base unit. With single zone units you are generally heating or cooling the whole bed equally. The Dual Zone System is a bundle that consists of two BedJet units and a Dual Zone Cloud Sheet. In this setup, you can have each side of the bed independently heated and cooled by their own BedJet and remote control.

The BedJet Dual Zone system is available for king size beds and split king beds. 

To accommodate a regular King Size bed, the BedJet King Size Dual Zone system is comprised of one King Size Dual Zone Cloud Sheet and two BedJet units for each side. The King Size Dual Zone Cloud Sheet is one sheet that covers the entire bed with the two zones stitched into it. 

Split King beds are typically adjustable beds comprised of two Twin XL mattresses side by side. Since Split King beds often have their own independent bedding on each side, the BedJet Dual Zone Split King system provides two Twin XL sheets and two BedJet units. 

If you have a Split King bed that you make with shared bedding, than you can go with the BedJet King Size Dual Zone system rather than the Split King.

Absolutely! You can easily add a second BedJet and use them on the same bed without issue! 

If you are currently using a single BedJet and would like to upgrade to a Dual Zone System for Couples you will need just the following to complete the setup:

• One BedJet 3 Climate Comfort System (with remote or app-only)
• One Dual Zone Cloud Sheet for your size bed

The BedJet Climate Control System has patented acoustic damping technology built into the base unit and is one of the quietest sources of air delivered of any consumer appliance. The BedJet is far quieter than any bedroom window fan or air conditioner when used on typical settings of low and medium (measured at 38dB to 39dB). The noise is a very soothing background white noise and similar to your household HVAC register. Our high and Turbo bed warming settings are extremely powerful and do generate more noticeable noise than this, but Turbo-heat mode is limited to running for maximum of 10 minutes. Turbo-heat is just too powerful for all night sleeping but it feels great when you get in — no other product can warm the bed by 30 degrees in five minutes like the BedJet!

When installed in its natural home under the bed, the following are dB sound measurements take from the pillow:

• Measured Ambient Room Noise (BedJet off): 37dB

• BedJet Cool, 50% (most typical highest setting for all night cooling): 38dB

• BedJet Cool, 100% (unlikely to be used other than short bursts): 42dB

• BedJet Heat, 50%: (most typical highest setting for all night heating): 39dB

• BedJet Heat, 100%: (unlikely to be used other than short bursts): 43dB

• BedJet Burst Heat, 100% (can only be used for 10 minutes before auto-shutoff): 47dB

Yes! The BedJet has a lifetime washable air filter located in the air intake grill, and only needs to be rinsed once every 3 months (more often if you have pets).

For BedJet 3 units, simultaneously press the filter icons on each side of the grille in the direction of the arrows to release it. Then just remove the filter, wash under the sink, and replace.

Air filters must be purchased separately.

In cooling mode, each unit draws up to 50 watts. In ordinary heat modes the unit can range from 150 watts to 1500 watts depending on the setting! The 1500 watt Turbo-heat setting can only run for a maximum of ten minutes, but needs less than five minutes to raise the temperature of your bedding to that toasty warm just out of the dryer feeling — No other product in the world can do that!

If you are concerned about total power on heating, you can use the "Low Power" setting to limit Heat and Turbo modes to maximum 800 watts. This power can be handled on a typical 15A bedroom AC circuit. If you are using a dual zone system with two BedJets, make sure Low Power is always set to ON for each unit. This will limit the power draw so that the two units combined don't exceed the 1500 watt max.

Generally you can operate the unit every night in cooling mode for less than one dollar a month and in heating mode for a few dollars a month.

The BedJet is completely BPA free and made from both PP (Polypropylene) and ABS (Acrylonitrile butadiene styrene) type plastics. PP plastic (Polypropylene) specifically is actually a food grade type plastic (commonly used for reusable water bottles) which we use for the air hose and attachment parts closest to the bed. ABS type plastic is generally considered very safe for use and is used for production of products like Legos, printers, utensils and more.

The BedJet is an extremely low maintenance machine. The only regular maintenance that should be done is removing and cleaning the lifetime air filter; check on it every three months, more often if you have pets sleeping next to the BedJet. The BedJet has a lifetime washable air filter located in the air intake grille: simultaneously press the filter icons on each side of the grille in the direction of the arrows to release. 

Just remove the filter, rinse both sides under the sink, let dry, and replace! Easy peasy lemon squeezy!

We at the BedJet company are gadget nerds, independent engineers, and inventors who created this product because we loved the idea of it. We are not a big corporate appliance company bent on squeezing the last dollar of cost out of what we make. We tell you this because we are very personally tired of the cheap, flimsy plastic products that are laid onto us by the big appliance companies with no durability and which break in less than a few years or even months. Or the electric blankets that only last two years before you have to throw them away! We refuse to be that kind of company. The BedJet is a highly engineered durable machine using a 20,000 hour direct drive DC Motor, designed to give you many years of worry free operations. Think about that 1960's vacuum cleaner your grandmother used that just kept going and going and going... It's kind of like that.

The BedJet Smart Remote App is available for iOS and Android devices. This FREE Bluetooth app offers all the same features as the physical BedJet Remote, including one-touch memory keys, programmable Biorhythm cycle scheduling, and fully customizable sleep temperature settings. Additionally, the app allows you to configure your home WiFi connection to update the BedJet firmware as needed.