BedJet 3 Climate Comfort Sleep System

The BedJet Climate Control System has patented acoustic damping technology built into the base unit and is one of the quietest sources of air delivered of any consumer appliance. The BedJet is far quieter than any bedroom window fan or air conditioner when used on typical settings of low and medium (measured at 38dB to 39dB). The noise is a very soothing background white noise and similar to your household HVAC register. Our high and Turbo bed warming settings are extremely powerful and do generate more noticeable noise than this, but Turbo-heat mode is limited to running for maximum of 10 minutes. Turbo-heat is just too powerful for all night sleeping but it feels great when you get in — no other product can warm the bed by 30 degrees in five minutes like the BedJet!

When installed in its natural home under the bed, the following are dB sound measurements take from the pillow:

• Measured Ambient Room Noise (BedJet off): 37dB

• BedJet Cool, 50% (most typical highest setting for all night cooling): 38dB

• BedJet Cool, 100% (unlikely to be used other than short bursts): 42dB

• BedJet Heat, 50%: (most typical highest setting for all night heating): 39dB

• BedJet Heat, 100%: (unlikely to be used other than short bursts): 43dB

• BedJet Burst Heat, 100% (can only be used for 10 minutes before auto-shutoff): 47dB

Yes! The BedJet has a lifetime washable air filter located in the air intake grill, and only needs to be rinsed once every 3 months (more often if you have pets).

For BedJet 3 units, simultaneously press the filter icons on each side of the grille in the direction of the arrows to release it. Then just remove the filter, wash under the sink, and replace.

Air filters must be purchased separately.

In cooling mode, each unit draws up to 50 watts. In ordinary heat modes the unit can range from 150 watts to 1500 watts depending on the setting! The 1500 watt Turbo-heat setting can only run for a maximum of ten minutes, but needs less than five minutes to raise the temperature of your bedding to that toasty warm just out of the dryer feeling — No other product in the world can do that!

If you are concerned about total power on heating, you can use the "Low Power" setting to limit Heat and Turbo modes to maximum 800 watts. This power can be handled on a typical 15A bedroom AC circuit. If you are using a dual zone system with two BedJets, make sure Low Power is always set to ON for each unit. This will limit the power draw so that the two units combined don't exceed the 1500 watt max.

Generally you can operate the unit every night in cooling mode for less than one dollar a month and in heating mode for a few dollars a month.

Absolutely, if you’re interested in using the BedJet for just one side of your bed, you’ll only need a single BedJet 3 unit to begin. You can use it with your existing bedding or pair it with our Cloud Sheet accessory. In this scenario, we recommend the Cloud Sheet, which directs the airflow exclusively to your side of the bed, ensuring your partner isn’t affected.

For covering your side, you have two options:

1. Twin XL Cloud Sheet: This size covers only your side, allowing personalized airflow.
2. Dual Zone Cloud Sheet: If you want to share the same top sheet with your partner, choose this option. It allows air to flow through only the selected side.

Should you decide to upgrade to a Dual Zone setup later, simply add a second BedJet unit (if using the Dual Zone Cloud Sheet) or both a second BedJet and a Twin XL Cloud Sheet (if starting with one side)."

Remember, the BedJet is all about personalized comfort!

The BedJet is completely BPA free and made from both PP (Polypropylene) and ABS (Acrylonitrile butadiene styrene) type plastics. PP plastic (Polypropylene) specifically is actually a food grade type plastic (commonly used for reusable water bottles) which we use for the air hose and attachment parts closest to the bed. ABS type plastic is generally considered very safe for use and is used for production of products like Legos, printers, utensils and more.

The BedJet is an extremely low maintenance machine. The only regular maintenance that should be done is removing and cleaning the lifetime air filter; check on it every three months, more often if you have pets sleeping next to the BedJet. The BedJet has a lifetime washable air filter located in the air intake grille: simultaneously press the filter icons on each side of the grille in the direction of the arrows to release. 

Just remove the filter, rinse both sides under the sink, let dry, and replace! Easy peasy lemon squeezy!

We at the BedJet company are gadget nerds, independent engineers, and inventors who created this product because we loved the idea of it. We are not a big corporate appliance company bent on squeezing the last dollar of cost out of what we make. We tell you this because we are very personally tired of the cheap, flimsy plastic products that are laid onto us by the big appliance companies with no durability and which break in less than a few years or even months. Or the electric blankets that only last two years before you have to throw them away! We refuse to be that kind of company. The BedJet is a highly engineered durable machine using a 20,000 hour direct drive DC Motor, designed to give you many years of worry free operations. Think about that 1960's vacuum cleaner your grandmother used that just kept going and going and going... It's kind of like that.

Your beloved pets can safely enjoy the cooling or warming effects of the BedJet alongside you. However, keep in mind that they should avoid sleeping near the air delivery nozzle. Blocking this area could impact the airflow from the BedJet. 

Rest assured that if your pet accidentally causes any part to break, it’s completely covered under the comprehensive two-year warranty provided by BedJet.

Happy snuggling with your furry companions

Absolutely, tens of thousands of our BedJet owners use their BedJets successfully with adjustable beds. However, you may need to locate the BedJet base unit further away from the nozzle. Our air hose can expand and compress for this reason. The flexibility of the air hose enables it to keep the air nozzle in place as the foot of your bed articulates up and down. Study the underside of your adjustable bed frame to find an area with a vertical clearance of 6" for the BedJet 3. Test fit the BedJet in that location by running through the full articulation range of your bed frame to make sure the BedJet won't get crushed. Keep a sharp eye under the bed when you do this, and remember our 60 day guarantee—if you can't make it work with your bed, we will take it back with free return shipping! Just please, don't squash your BedJet!

The BedJet Smart Remote App is available for iOS and Android devices. This FREE Bluetooth app offers all the same features as the physical BedJet Remote, including one-touch memory keys, programmable Biorhythm cycle scheduling, and fully customizable sleep temperature settings. Additionally, the app allows you to configure your home WiFi connection to update the BedJet firmware as needed.